Energy Saving Accent Lighting
TW Visions Technologies Inc.
Energy Saving Accent Lighting
Products
LPL-5
Description:
Each LPL-5 Low Profile Lighting Strip consist of five (5) bright encapsulated state-of-the-art LEDs. The strip is peel and stick and comes with a male connector at one end and a female at the opposite. These connectors allow an easy way to terminate each strip to the next. A maximum of ten units can be interconnected in a continuous run. Mounted under cabinets, the 1.45 mm (0.057") thick strip can easily be concealed with a 6.35 mm (1/4") valence. Typical operating cost per year if energized 12 hours per day is only $0.30 when powered with the model HK-H1-A06 power supply and $0.85 when powered with the HK-H1- A09 power supply. These strips are truly energy efficient, resulting in huge cost savings each year.
LPL-5 Specifications P O W E R S U P P L I ES
LPL-5 Parameters HK-H1-A06 HK-H1-A09 Units
Voltage Test Condition 6.22 9.32 Volts dc
Forward Current 0.111 0.21 Amps
Forward Power 0.69 1.96 Watts
Luminous Flux 28 52 lumens
Lifespan 100,000 + 50,000 + Hours
Maximum Series Runs 11 10 Strips
Color Temperature: ~5400 ~5600 Kelvin
Beam angle: 120 0
Dimensions: (mm) L=500 W=7.8 T=1.45
Operating Temperature: -30 to +85 C
Moisture Resistant: Yes
UV Emissions: Zero
Certifications: UL E256072 RoHS Compliant
LPL-10
Description:
The LPL-10 is an ultra low power, ultra thin and flexible peel and stick accent lighting strip. Each strip contains ten (10) exposed miniature LED's. Overall length is 1/2 meter by 7.25 mm wide by 0.2 mm thick. Each strip can either be soldered or terminated with male and female cinch connectors. The LPL-10's are powered with the HK-H1-A06 (6 volts DC) power supply. Typical applications is for furniture back lighting. Output light color is similar to the color of fog.
LPL-10 Specifications P O W E R S U P P LY
LPL-5 Parameters HK-H1-A06 Units
Voltage Test Condition 6.22 Volts dc
Forward Current 0.05 Amps
Forward Power 0.311 Watts
Luminous Flux 2.5 lumens
Lifespan 100,000 + Hours
Maximum Series Runs 15 Strips
Color Temperature 5200 - 5600 Kelvin
Beam angle: 120 0
Dimensions: (mm) L=500 W=7.25 T=0.2
Operating Temperature: -30 to +85 0C
Moisture Resistant: No
UV Emissions: Zero
Certifications: RoHS Compliant
LPL-5-Kit
The LPL-5 Kit is very versatile and easy to install. Simply peel and stick, terminate the 2 meter cable connector from the switch box to the female end to the LPL-5 strip, then simply plug the power supply jack into the switch box and finally, plug the power supply into a 120 Volt outlet, turn the switch on and presto you have beautiful accent lighting.
Kit Includes:
2 - LPL-5 Lighting Strips
1 - HK-H1-A06 (6 Volt Power Supply)
1 - PT-6-MF (6 inch Pigtail with male and female connectors)
1 - Switch box (Includes 6 foot cable, Power Jack and On-Off Switch)
Extra LPL-5 units available (Maximum number of LPL-5 strips is 10)
Handrail Bracket - HRB-ADJ
Material: Forged Steel
Shaft: Hollow Core
Wall Base Unit: Adjustable by 25.5 mm (1 Inch)
Power Jacks - PJ-1 and PJ-2
Power Jacks provide a means to connect the output jack of the power supplies to the interconnecting cables which feeds power to the LPL units. Power Jack units are typically located in utility rooms near a 120 volt outlet. Interconnecting cables minimum gauge is # 18 wire such as thermostat cable.
Power Jack Contact Rating: 5A @ 12Vdc
Contact Resistance: 0.01 ohms
Cover Plate: Galvanized steel
Safety Approvals: UL E319753
Pigtails: AWG18 Current Rating: 3 A
Model PJ-1 - Single Power Jack with cover
Model PG-2 - Dual Power Jack with cover
Pigtail Assemblies
Pigtails are used to either terminate power to the LPL units or to interconnect one LPL to the next. Red marking indicate polarity and must face in the same direction as the LED's.
Connectors:
Molding Material: Polypropylene
Flame Retardant per UL 94V-0
Current Rating: 2 Amps Continuous
Pigtail Wires
Wire Gauge: AWG 20
Max. Current: 1.5A
Insulation Voltage Rating: 100 V
Available Pigtail Models:
PT-36-F (36 inch pigtail with female connector)
PT-6-MF (6 inch pigtail with male and female connectors)
PT-12-MF (12 inch pigtail with male and female connectors)
PT-24-MF (24 inch pigtail with male and female connectors)
PT-36-MF (36 inch pigtail with male and female connectors)
CM-2 Male Connector with Soldering Pad
CF-2 Female Connector with Soldering Pad
Power supplies
| Model | HK-H1-A06 | HK-H1-A09 |
| Input Specifications: | ||
| Rated Input voltage: | 100V ~ 240 Vac | 100V ~ 240 Vac |
| Input Voltage Range: | 90 V ~ 264 Vac | 90 V ~ 264 Vac |
| Rated Frequency: | 50 ~ 60 Hz | 50 ~ 60 Hz |
| Frequency Range: | 47 ~ 63 Hz | 47 ~ 63 Hz |
| Rated Input Current: | 800 mA Max. | 800 mA Max. |
| Inrush Current: | 50A Max. | 50A Max. |
| No Load Power Consumption: | 0.5 Watts Max. | 0.5 Watts Max. |
| Output Specifications: | ||
| Output Voltage: | 6 Vdc @ 3.5 A | 9 Vdc @ 2.5 A |
| Line Regulation: | 62% Max. | 62% Max. |
| Load Regulation: | 65% Max. | 65% Max. |
| Over Current Protection: | Yes (Auto Recovery) | Yes (Auto Recovery) |
| Short Circuit Protection: | Yes (Auto Recovery) | Yes (Auto Recovery) |
| Ripple Voltage: | 80 mV Max. | 90 mV Max. |
| Efficiency: | Energy Star Compliance | Energy Star Compliance |
| Operating Temperature: | 00 C ~ +40o C | 00 C ~ +40o C |
| Operating Humidity: | 10 ~ 95 % | 10 ~ 95 % |
| Safety Approvals: | UL / ULc | UL / ULc |
Information within this document is accurate at the time of publishing, however, specifications are subject to change without notice.
